TENSE MDK-02 single-phase submersible motor pump control, 140-280 V AC, 60 A

Product description

The TENSE MDK-02 control unit is designed for the protection and control of submersible pumps for boreholes and wells.
It provides protection against voltage and current spikes, water shortage, and pump overload.
Integrated functions also enable monitoring of tank fill level, setting of time delay, and control of inrush current.

Key features

• Single-phase power supply, range: 140-280 VAC

• Max. current: 60 A

• Microprocessor control with LED display

• Protection functions:

  • Overvoltage/undervoltage

  • Overcurrent/undercurrent

  • Well/tank water level control

• Operating parameter settings: P1-P10 (e.g., maximum/minimum voltage, current, response delay, start interval, automatic reset time)

• Operating modes: START / STOP

• Built-in pump delay timer to extend pump life

• Pump status display via LED indicators

Technical parameters

• Operating voltage: 140-280 V AC

• Frequency: 50 Hz

• Current range: 0,5-60 A

• Power consumption: < 4 W

• Liquid sensitivity: < 50 kΩ

• Protection class: IP40

• Operating temperature: -5 °C to +55 °C

• Max. cable cross-section: 1.5 mm²

• Installation opening: 91 × 91 mm

• Installation height: < 2000 m

• Weight: 325 g

Application

• Protection of submersible pumps against dry running and overload

• Water level control in tanks and wells

• Monitoring and safe operation of household and industrial pumps

Important notes

• Electrodes / water level sensors are not included - must be ordered separately

• The control unit must be connected according to the manufacturer's wiring diagram

• The liquid must not be flammable or explosive

• Installation temperature must be > 0 °C

• Pump must be grounded

• The use of two level sensors requires the correct connection of the upper and middle sensors