DTA-96 Digital Temperature Level Control Relay

Temperature controller (two-channel thermostat) with timer and heating profile - automatically adjusting PID controller, panel or device mounting. Stepper temperature controller. Dimensions 96x96x90 mm.

Unlike cheap analog devices, the TENSE thermostat allows setting temperature limits and the time in which the temperature reaches the set values. This greatly simplifies the programming process. Additionally, the PID mode allows keeping the system temperature as close as possible to the set values.

Another important difference from competitors is the simultaneous display of current temperature, setpoint temperature, control step, and time. The presence of the START/STOP/PAUSE/SET buttons on the front panel is very convenient - it allows quick and efficient control of your technological processes.

Main features:

• You can choose one of the operating modes: P, PI, PD, PID or simply ON-OFF.

• Two relay control outputs OUT and ALARM, the OUT output can optionally be set to semiconductor relay

• Up to 20 temperature levels / heating stages adjustable

• Each stage can be programmed for up to 18 operating hours

• Automatic selection of PID control parameters

• Wide selection of temperature sensors for connection to the thermostat - T/C (J, K, T, S, R) or Pt100

• Automatic reduction of "overshoot" in PID mode

• Integrated anti-windup function - compensation of saturation effect during integration

• Choice between absolute, relative, or band value for the ALARM contact

• Ability to set upper and lower limits for SET and ALARM

• The controller display shows two temperature values - 4 characters and 7 segments for the set temperature value and 4 characters and 7 segments for the current temperature value measured by the controller, as well as time interval values and step number

• Built-in cold junction compensation for T/C sensors (cold junction compensation) 0...50°C

• Linear compensation for Pt100 type temperature sensors connected to the thermostat, up to 10 Ohms

• Ability to set the offset value of the measured temperature for the thermostat from -100...+100°C

• Password protection for the temperature controller parameters

• The temperature controller has very high accuracy of settings and time intervals

• Non-volatile memory (EEPROM) for storing settings

• Easy connection to the controlled device - all connections are made with quick connectors

• Optional 24 V DC or AC power supply available

• Installation altitude - up to 2000 m above sea level

• Temperature sensor not included

• Please remember to order a protective switch to protect the power supply circuits and the control/signal contact.

Measurement scales (ranges):

Sensor type - range:

• -100 ... 600 °C, Type J T/C, (InPt = J)

• -100 ... 1300 °C, Type K T/C, (InPt = k)

• -100 ... 400 °C, Type T T/C, (InPt = t)

• 0 ... 1750 °C, Type S T/C, (InPt = S)

• 0 ... 1750 °C, Type R T/C, (InPt = r)

• -100 ... 600 °C, Pt100 (InPt = Pt)

• -99.9 ... 600.0 °C, Pt100 (InPt = Pt.0)