Digital Current Indicator Three-Phase Panel Ammeter Three-Phase Built-in

DJ-A96T - Digital three-phase current meter for control panels

The three-phase digital ammeter DJ-A96T is designed for accurate current monitoring in three-phase systems. It can display the instantaneous load of each phase L1, L2, L3 using external current transformers (CT). The device offers a clear display, easy setup, and reliable operation.

Key features

• Current measurement in three-phase systems

• Separate display for the phases L1, L2, L3

• Measurement with external current transformers

• Easy setting of the current transformer ratio

• Large and easy-to-read display - 3×4 digits, height 14 mm

• Compact design of the control panel

Technical parameters of the ammeter

• Supply voltage: 230 V AC

• Device consumption: < 4 VA

• Current measurement range: 0.1...5.5 A

• Supported current transformer range: 5/5 A to 5000/5 A

• Measurement accuracy: ±2%

• Display: LED, 3×4 digits, height 14 mm

• Dimensions: 97,2 × 97,2 mm

• Cutout size: 91 × 91 mm

• Depth: 45 mm

• Current transformers are not included in the delivery (can be purchased separately)

Functionality and Settings

1. Connect the device according to the wiring diagram.

2. Connect the current transformers according to the expected current in the system (conversion xxxx/5 A).

3. Connect the current transformer wires to the terminals "kx" and "lx". The current transformer output must not exceed 5 A.

4. After turning on the power supply, press and hold the "Menu" button for 2 seconds.

5. Use the Up/Down buttons to adjust the conversion of the current transformers used.

6. Save the settings by pressing and holding the "Menu" button.

7. When the load is connected, the ammeter begins to measure and display the current.

Note: Current transformers must always be grounded for safety reasons.

Technical features of the semiconductor output relay

(This time the listed parameters refer to the semiconductor relay - if it should be separate, I can split it).

• Relay type: Semiconductor

• Control voltage (input): 3...32 V DC

• Switching voltage: 24...480 V AC (not suitable for motors)

• Switching voltage drop: < 3 V

• Trigger current: 5 mA

• Coil voltage: 3...32 V DC

• Maximum switching current: 25 A

• Insulation resistance: 2500 V AC

• Switching method: Turn on at zero crossing current